Dash mounted parking brake valve - Printable Version
+- Newell Gurus (
https://newellgurus.com)
+-- Forum: Repair Maintain and Inspect (
https://newellgurus.com/forumdisplay.php?fid=19)
+--- Forum: General Repair (
https://newellgurus.com/forumdisplay.php?fid=23)
+--- Thread: Dash mounted parking brake valve (
/showthread.php?tid=4141)
Dash mounted parking brake valve -
Guy - 04-09-2018
I have the steering column removed at the moment and think it might be the perfect time to replace this valve which has a small leak on the push pull shaft. I think the valve might be a generic item.1 inlet, 1 exhaust, and 2 outputs. The 5 words that get me in trouble "how hard could it be?" Is this job as,simple as it looks? Please save me from myself.....
RE: Dash mounted parking brake valve -
encantotom - 04-09-2018
i replaced mine. common item. it should have some wiring on the back as well
no big deal
tom
RE: Dash mounted parking brake valve -
Richard - 04-10-2018
Make sure you drain all the air from the system including the brake tanks or you’ll get a little dust off when you take the fittings loose
RE: Dash mounted parking brake valve -
bikestuff - 04-10-2018
Oh, and chock the wheels!
RE: Dash mounted parking brake valve -
ccjohnson - 04-10-2018
Be sure to take pics and make notes on how everything comes apart. That way if you get hung up waiting on parts for a couple of days, you will not have to rely solely on memory as to how it goes back together.
RE: Dash mounted parking brake valve -
Guy - 04-10-2018
Good advice. Did the same on the steering column teardown.
RE: Dash mounted parking brake valve -
br549hoffman - 04-10-2018
your braking system should require 80+ psi in the system before the breaks will release ...... but that being said it never hurts to be safe
RE: Dash mounted parking brake valve -
Guy - 04-10-2018
(04-10-2018, 04:23 AM)Richard Wrote: Make sure you drain all the air from the system including the brake tanks or you’ll get a little dust off when you take the fittings loose
Thank you for that. My wife would have loved it though?
RE: Dash mounted parking brake valve -
kaptain - 03-30-2023
(04-09-2018, 08:06 PM)encantotom Wrote: i replaced mine. common item. it should have some wiring on the back as well
no big deal
tom
Tom, could you please share the part# of this parking release valve and the place where I can purchase from?
Thanks!
RE: Dash mounted parking brake valve -
Richard - 03-31-2023
https://www.napaonline.com/en/p/MBIKN20021?cid=paidsearch_shopping_dcoe_google&campaign=GSC-Towing&campaign_id=8911645606&adgroup_id=106416389246&adtype=pla&gclid=Cj0KCQjwiZqhBhCJARIsACHHEH97PBwoz3p7JuJT6Pashhh8XE_zDSgnINRX-ppBulxiyvqFwa_HTHsaAi_vEALw_wcB&gclsrc=aw.ds&