Torque wrench - Printable Version
+- Newell Gurus (https://newellgurus.com)
+-- Forum: Fun Stuff (https://newellgurus.com/forumdisplay.php?fid=12)
+--- Forum: Tools (https://newellgurus.com/forumdisplay.php?fid=48)
+--- Thread: Torque wrench (/showthread.php?tid=3702)
+- Newell Gurus (https://newellgurus.com)
+-- Forum: Fun Stuff (https://newellgurus.com/forumdisplay.php?fid=12)
+--- Forum: Tools (https://newellgurus.com/forumdisplay.php?fid=48)
+--- Thread: Torque wrench (/showthread.php?tid=3702)
Torque wrench - Yachts - 08-16-2017
Due to blowouts and wanting to change my own brakes. I am now in possession of my own torque wrench of 600lb feet.. holy cow. Is it heavy
RE: Torque wrench - encantotom - 08-16-2017
yea, i carry one too.
tom
RE: Torque wrench - Richard - 08-16-2017
Marc,
Just want to reiterate it takes two people to properly use that wrench. One person on the grunt end of course, and the second person holds the wrenchhead at the nut. You won't get the proper torque without the second person AND you can get hurt using that much force if the socket slips off the nut
RE: Torque wrench - Chester Stone - 08-16-2017
May need a cheater pipe.
RE: Torque wrench - kyleb - 08-16-2017
I find it easy to properly torque the wheel nuts by myself - if I use the right accessory tool.
I made this out of 3/4" plywood. Just choose the slot that is closest to the nut you are working to support the extension close to the torque wrench. Works extremely well.
RE: Torque wrench - Yachts - 08-16-2017
I probably don't know what I'm talking about but mine twist and gets shorter or longer depending on the torque setting .the longer you make it the less torque you get. So wouldn't the cheater pipe defeat the torque setting?
RE: Torque wrench - HoosierDaddy - 08-16-2017
My automotive torque wrench clicks when it reaches the desired torque. A cheater bar would just require less force at the extended handle length to reach the desired torque setting. ie. If you set it for 100 ft/# it would require 50# of force at the end of the 2 foot handle. If you extend the handle to 4 foot it would then require 25#...................I think.
RE: Torque wrench - kyleb - 08-16-2017
All of the paperwork & instructions I have ever seen concerning torque wrenches clearly state DO NOT USE CHEATER BARS.
The torque wrench is calibrated to have force applied at the handle only. Any additional forces will yield false readings.
My 600 ft-lb torque wrench is long enough that I can lean on it to get the desired 450 ft-lbs for my wheels.
RE: Torque wrench - ccjohnson - 08-17-2017
(08-16-2017, 06:18 PM)kyleb Wrote: I find it easy to properly torque the wheel nuts by myself - if I use the right accessory tool.
I made this out of 3/4" plywood. Just choose the slot that is closest to the nut you are working to support the extension close to the torque wrench. Works extremely well.
That is a great tool! Probably a lot more steady than trying to hold extension in place by hand. You need to apply for patent & sell this to large truck tire shops everywhere. Don't forget us when you are rolling in cash! Let us know when you hit "Shark Tank" with it!