You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Generator controller - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Generators (https://newellgurus.com/forumdisplay.php?fid=25)
+--- Thread: Generator controller (/showthread.php?tid=3304)

Pages: 1 2


Generator controller - Mxfarm - 01-16-2017

Have the standard 12.5kw Kohler genset in our '87 Newell. Looking to either rebuild or replace the controller. 

Ran across this controller that I'm looking @ for a replacement - but if I can find a 'kit' w/all the relays switches I might go that route also.

Any advice/opinions?

marc


RE: Generator controller - bestgenman - 01-16-2017

Marc, What is the part number and manufacturer?


RE: Generator controller - Mxfarm - 01-16-2017

Kohler 12.5kw - the model #, I'm not being very successful in locatating. Found the Model of the generator itself, but not the genset, yet. Smile


RE: Generator controller - TGDianics - 01-16-2017

I have a 1988 coach, #163 with a Kohler model 12.5CCO generator.

I can send pdf copies of the Parts & Service Manuals

Tim


RE: Generator controller - Mxfarm - 01-16-2017

(01-16-2017, 08:50 PM)TGDianics Wrote:  I have a 1988 coach, #163 with a Kohler model 12.5CCO generator.

I can send pdf copies of the Parts & Service Manuals

Tim

That would be great - email ok?


RE: Generator controller - TGDianics - 01-16-2017

(01-16-2017, 09:07 PM)Mxfarm Wrote:  
(01-16-2017, 08:50 PM)TGDianics Wrote:  I have a 1988 coach, #163 with a Kohler model 12.5CCO generator.

I can send pdf copies of the Parts & Service Manuals

Tim

That would be great - email ok?

Sure..my email is [email protected], send me your's


RE: Generator controller - bestgenman - 01-17-2017

Once you have the part number of the controller, let me know.  I may have one in stock or can point you to a vendor.

what makes you think the controller is faulty?


RE: Generator controller - Mxfarm - 01-17-2017

I can force it to run by jumping a couple solenoids on the engine - but without the jumps it will start - then die.


RE: Generator controller - ccjohnson - 01-17-2017

Sounds like possibly auto fire extinguisher may need to be recharged.


RE: Generator controller - Mxfarm - 01-17-2017

On a 1987? I've not seen anything like that.