You are not logged in or registered. Please login or register to use the full functionality of this board...
Newell Gurus
Air regulator on Valid Slide - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Slides (https://newellgurus.com/forumdisplay.php?fid=55)
+--- Thread: Air regulator on Valid Slide (/showthread.php?tid=2742)



Air regulator on Valid Slide - bikestuff - 02-12-2016

Gang,

I have been inspired to look for leaks in my coach by @"rheavn"   With a sonic leak detector, I have found a leak in one of the regulators for my Valid slides.

     As you can see it looks like a standard air regulator but the base is attached to some sort of block.  I have not yet called Newell, but was wondering if anyone had a source for these. From the picture it looks like a SMC NAR2000-N02B-1. According to the SMC website it is Manufacturer Discontinued.

I am not POSITIVE that it is the valve.  It could be the gauge which looks pretty rough.

Has anyone experienced a leak in the body of one of these regulators?

Cheers,
bill


RE: Air regulator on Valid Slide - bikestuff - 02-12-2016

According to SMC the new part number is AR20-N02BG-1Z-A. $26 in qty 1


RE: Air regulator on Valid Slide - rheavn - 02-12-2016

Bill,
Now that you have found a leak.  Use a little soapy water solution, I like kids bubbles, a rag, & spray around on all the fittings and regulator body & you'll know exactly what is leaking.

Good Job!!!!!