schematic of manual transfer switch for 1990 -
encantotom - 09-01-2012
hi all,
i put new relays in the manual transfer switch in my 1990. i also replaced the neon indicator lights. i thought having the info might help someone. you would have to verify that your setup is the same as mine was. i suspect that newell used the same setup for a while, but you would have to doublecheck yours. the old relays were no longer manufactured so the contactors i show below are the replacements for them.
here is the schematic of the transfer switch i sketched out after tracing the wires.
there are 2 different contactors used here. the 2 big ones and then an auxiliary smaller contactor that adds on.
i bought mine at grainger but they are available at other places.
the part numbers for them are as follows. you need 2 of each.
the big one is a
Brand SQUARE D
Mfr. Model # 8910DPA63V02
the little one is a
Brand SQUARE D
Mfr. Model # 9999D01
here are the grainger links to them.
https://www.grainger.com/Grainger/wwg/search.shtml?searchQuery=5B097&op=search&Ntt=5B097&N=0&GlobalSearch=true&sst=subset
https://www.grainger.com/Grainger/wwg/search.shtml?searchQuery=4B973&op=search&Ntt=4B973&N=0&GlobalSearch=true&sst=subset
tom
picture below is of the new contactors
the picture below this is the old contactors
RE: schematic of manual transfer switch for 1990 -
smagown - 05-04-2013
Where is the transfer switch located? I can't find mine.
Thanks,
RE: schematic of manual transfer switch for 1990 -
smagown - 05-04-2013
I found it. It is under a false panel in front of the main electrical panel in my rear closet . A Todd PS-275 automatic transfer switch.
Thanks,