Front A/C blowing breakers - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Documentation (https://newellgurus.com/forumdisplay.php?fid=13)
+--- Forum: Air Conditioning (https://newellgurus.com/forumdisplay.php?fid=38)
+--- Thread: Front A/C blowing breakers (/showthread.php?tid=745)

---

RE: Front A/C blowing breakers - Richard - 05-03-2013

Chester,

Get a fin comb and fix the bent fins. A fin comb is spaced exactly to fit the spacing on the aluminum fins. Piece of cake to straighten the fins and it will improve the air flow a little

---

RE: Front A/C blowing breakers - Chester Stone - 05-04-2013

Russ and Tom, I read a post where Russ replaced your SCS control board relays. I have bee all over the internet and cannot find any. If they list either of the two relays, they have no stock. I would appreciate it very much if you would post the source for these relays: Song Chuan SCL-1-DPDT 120VAC AND 12VDC. Is Newell the only place to obtain a spare control board?

---

RE: Front A/C blowing breakers - encantotom - 05-04-2013

the relays are generic. i will post later the relays i used and where i got them.

tom

---