3m front end clear shield removal - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Technical Discussions (https://newellgurus.com/forumdisplay.php?fid=3)
+--- Forum: Exterior (https://newellgurus.com/forumdisplay.php?fid=7)
+--- Thread: 3m front end clear shield removal (/showthread.php?tid=840)

---

RE: 3m front end clear shield removal - bikestuff - 06-13-2013

Good job! Did you get the stainless from Newell? Was it already bent or was that part of installation? Stuck on with 3M tape?

Really a nice looking job...and those new headlights really shine!

---

RE: 3m front end clear shield removal - encantotom - 06-13-2013

hi bill,

bought the 3 pieces from newell last summer. they are straight and you have to bend them as you install them.

used 3m trim tape covering the entire back.

getting that yellowed awful looking mask off mixed with new lights and all that stainless look nice.

seems like most of my vintage had the stainless, but ours did not.

tom in osceola, iowa

---