Zerk fitting locations - Printable Version

+- Newell Gurus (https://newellgurus.com)
+-- Forum: Repair Maintain and Inspect (https://newellgurus.com/forumdisplay.php?fid=19)
+--- Forum: General Repair (https://newellgurus.com/forumdisplay.php?fid=23)
+--- Thread: Zerk fitting locations (/showthread.php?tid=1199)

---

RE: Zerk fitting locations - Ozarkguy - 01-15-2014

If someone has a bunch of time on there hands and likes to play with Excel... This is something I had saved for a rainy day.. all I've had is snow.. and that don't count!.

But could be modified to fit your greasing needs.. ..



or not.....

---

RE: Zerk fitting locations - Kreavet - 04-21-2022

Any grease fittings for the floors in the slides that move vertically?

---

RE: Zerk fitting locations - Richard - 04-21-2022

Not on HWH slide systems.

---

RE: Zerk fitting locations - DK on the road - 04-22-2022

At the recent service at Newell, The technician installed zerk fittings on the slide brackets that carry all my slides, (4 each slide) both inside and out. getting to the inside ones will be a lot of work, but getting them greased after never having had grease since 06' I'm guessing that It may not need it for another 10 years or so.

---

RE: Zerk fitting locations - Richard - 04-23-2022

Dave has Valid slides which ride on linear bearings 1/3 the way up the side. Those fittings are a great idea. One could mount remote hoses to ease access.

---

RE: Zerk fitting locations - Kreavet - 04-27-2022

Are there access panels in the basement to get at the locations for installing, and greasing the slide bearings? The floor as well as the Box?
Ty

---